Euv Technology Development Architect - Stability And Dose Controls

Company: ASML
Location: Perris
Posted on: January 24, 2023

Job Description:

LocationSan Diego CA, USTeamResearch & developmentExperience8+ yearsDegreeMasterJob CategoryPhysics, Optical engineering, Mechanical engineeringTravel10%Introduction to the jobASML US, LP brings together the most creative minds in science and technology to develop lithography machines that are key to producing faster, cheaper, more energy-efficient microchips. We design, develop, integrate, market and service these advanced machines, which enable our customers the world's leading chipmakers to reduce the size and increase the functionality of their microchips, which in turn leads to smaller, more powerful consumer electronics. Our headquarters are in Veldhoven, the Netherlands, and we have 18 office locations around the United States including main offices in Wilton, CT, Chandler, AZ, San Jose, CA and San Diego, CA."This position requires access to controlled technology, as defined in the Export Administration Regulations (15 C.F.R. - 730, et seq.). Qualified candidates must be legally authorized to access such controlled technology prior to beginning work. Business demands may require ASML to proceed with applicants who are immediately eligible to access controlled technology."Role and responsibilitiesWe are presenting you with a unique and exciting opportunity to join a dynamic and innovative Technology Development team, focused on conceiving and demonstrating the technologies required for next generations of high-power extreme ultraviolet (EUV) light sources. The EUV Light Technology Development Team is responsible for identifying system-level operating points for stable EUV production generated from laser produced plasmas and helps to chart the path to increase EUV power to meet the future needs of the Lithography industry. Based on a laser produced plasma (LPP) interaction with a stream of stable Tin droplets running at a rate of tens of thousands of times per second, our light source relies on a wide range of unique and challenging technologies including laser light amplification, high-power optic systems, plasma generation, as well as process variable sensing, actuation, metrologies and control.You are invited to bring your passion, knowledge and expertise in areas of applied physics, plasmas, metrology, optics, systems, dynamics, control theory, lasers, modeling/simulation and experiment design to push the boundaries of these technologies forward and into the future. The EUV Light Technology Development Team is fully based in San Diego, where the team identifies novel solutions that enable and define the next generation EUV source architecture. Development activities span the full range from concept definition, design, prototyping, modeling, and full-scale performance testing on a complete EUV source system. Operating a complete EUV source, under the same conditions as it would be used a lithography application, allows for system-level performance demonstrations and validation of new technologies where results can then be more easily transferred to the next product.One performance characteristic that is important to this role is dose, which is a critical aspect of an EUV light source for Lithography applications. We strive towards the ideal of delivering perfect dose, which requires an EUV light source to deliver the same EUV pulse energy on every pulse at multi-kilohertz repetition rates for many hours on end. This is very challenging in practice because many disturbances perturb the EUV pulse energy. Examples of these disturbances include vibrations, swirling gas flows, thermal optical laser pointing fast and slow drifts and many forms of droplet disturbances, all of which perturb the stability of the plasma generation process.These effects have different time-constants and different physical origins. It can be sometimes very challenging to pinpoint and even more challenging to identify a solution path. A successful candidate will be able to navigate this complex environment by interpreting various signals from metrologies, identifying improvements needs to controllers, lasers, actuators to make improvements to EUV stability and dose. The successful candidate will have a passion for innovation and be driven by curiosity, be highly analytical and excited to solve these problems, make new discoveries and communicate their work clearly to design teams. A background in plasma physics, EUV metrology and spectroscopy, laser-matter interaction, systems, dynamics, control theory, and embedded technology, will help a candidate to leave their mark on the next generation of EUV product and the future of technology.As the Technology Development Architect for EUV Generation, you will maintain the S-Next Roadmap for open loop EUV stability and controls.Duties and Responsibilities:Lead and guide research studies and experiments designed to provide recommendations towards product teams on the next generation EUV source laser technologiesContribute to and maintain the S-Next EUV Stability and Dose Research Roadmap, incorporate changes and make updates from models and/or experimental learning and/or decision pointsEnsure the Research Roadmap is communicated clearly and properly to stakeholders. Align with system engineering counterparts on the product roadmap and on model development that impact product dose roadmapsResponsible for advancing the EUV source architecture for next generation products, specifically in the EUV pulse energy stability, variation and dose spaceMake adaptations to a single pulse EUV recipe so that it works at full-EUV duty cycle and meets EUV intrinsic stability requirements for doseProvide technical leadership and operational credibility and have a balcony/dance engagement within the team and with strategic partners.Own the functional requirements, technical budgeting, investigation of all technical issues, provides potential solution paths, and provides execution guidance to the projectsIdentify the technical and operational risks and defines the technical PERT logic for addressing risks/questions (execution via the PLs)Lead function interface between other functions in tech dev; lead function interfacetowards SE and D& E on risks, roadmaps, learnings, technology/knowledge handoffs, updates, etc.Break down complex problems, identifies knowledge gaps and develops technical strategies and test plansIdentification of key scientific learning objectives and corresponding experimental design which will further the technological progress of the EUV generation processDemonstration of system-wide performance targets to meet the future technology roadmapDesign experiments and create models to characterize sensitivities and builds validated budgets for stabilityDesign experiments and validates whether new control loops meet EUV performance expectationsPlan, develop and execute system and subsystem performance tests, analyze test results and extract actionable knowledge from sub-module to full-system levelsDocument learning and communicate knowledge to engineering and product development teams to guide product improvement and release of new product nodesWork independently and in teams to deliver on a stated objective, whether it be the pursuit of new knowledge, the demonstration of a new capability, or the characterization of existing performanceLead and/or participate in preliminary and critical design reviewsDeliver technical and progress reports and presentations to upper management and internal / external customersPerforms other duties as assignedEducation and experienceRequires a MS or PhD in either Electrical or Mechanical Engineering with focus on Robotics or Dynamical Systems or Controls or Systems or Physics or other related science disciplinesMinimum of 8 years in technical engineering rolesMinimum of 4 years of experience in a technical leadership, project leadership or management roleFamiliar with technical aspects of engineering modules with multiple challenging mechanical, material, physical and optical constraints and interfacesPossess a good understanding of mechanics, physics and optics analysis software packages as well as data analysis tools such as MatlabFamiliar with the requirements for design and analysis of complex mechanical assembliesSkillsWorking at the cutting edge of tech, you'll always have new challenges and new problems to solve - and working together is the only way to do that. You won't work in a silo. Instead, you'll be part of a creative, dynamic work environment where you'll collaborate with supportive colleagues. There is always space for creative and unique points of view. You'll have the flexibility and trust to choose how best to tackle tasks and solve problems.To thrive in this job, you'll need the following skills:Result driven, ability to plan and prioritizeThe drive, energy and initiative to achieve continuous improvementMust be comfortable with a rapidly changing work environmentAbility to multi-task and set priorities without jeopardizing project scheduleMust be a person of high integrity with mature management and organizational skills who consistently builds effective relationships. Possess an open, honest and collaborative styleMust have a reputation as an effective leader of technical talent, someone who knows how to motivate and lead technical personnel to be their best and consistently meet objectives with a process for accountabilityMust be able to think strategically and plan effectively, yet possess a detail-oriented, hands-on approach to leading an engineering teamAbility to translate, statistically analyze data, and effectively report problems through written and/or graphical formatsExcellent negotiating and teambuilding skillsAbility to influence without powerAbility to work in any shift based on project needsStrong negotiation skills for interacting with other sectorsExcellent written and verbal communication skillsDiversity & InclusionASML is an Equal Opportunity Employer that values and respects the importance of a diverse and inclusive workforce. It is the policy of the company to recruit, hire, train and promote persons in all job titles without regard to race, color, religion, sex, age, national origin, veteran status, disability, sexual orientation, or gender identity. We recognize that diversity and inclusion is a driving force in the success of our company.Other informationPHYSICAL DEMANDS AND WORK ENVIRONMENTThe physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.While performing the duties of this job, the employee routinely is required to sit; walk; talk; hear; use hands to keyboard, finger, handle, and feel; stoop, kneel, crouch, twist, reach, and stretchThe employee is occasionally required to move around the campus including working while fully gowned in a clean room environmentThe employee may occasionally lift and/or move up to 25 poundsThe employee may be required to travel based on business needsSpecific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception, and ability to adjust focusThe environment generally is moderate in temperature and noise levelExtended periods of time in a clean room environment should be expected. Requires gowning in Class 10K gowning protocolMay need to work in labs with equipment that emit high-pitched noiseMay spend extended periods of time at a computer workstationThe Californiabase annual salary/hourly range for this role is currently$154,500 $257,500. Payscales are determined by role, level, location and alignment with marketdata. Individual pay is determined through interviews and an assessment ofseveral factors that that are unique to each candidate, including but notlimited to, job-related skills, relevant education and experience,certifications, abilities of the candidate and pay relative to other teammembers. Our recruiters can share more information about our bonus program,benefits and equity during the hiring process.EOE AA M/F/Veteran/Disability

Keywords: ASML, Perris , Euv Technology Development Architect - Stability And Dose Controls, IT / Software / Systems , Perris, California